5365-01-327-9089, SPACER,PLATE

National Stock Number:
5365-01-327-9089

Federal Supply Class:
5365

National Item Identification Number:
013279089

Description:
SPACER,PLATE

Detail:
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.

Manufacturer Information:

8453056-01

1S307

BECHTEL NATIONAL, INC.

Techincal Specification:

BOLT HOLE QUANTITY	4
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH	1.740 INCHES MINIMUM AND 1.760 INCHES MAXIMUM
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH	2.990 INCHES MINIMUM AND 3.010 INCHES MAXIMUM
HOLE DIAMETER	0.281 INCHES MINIMUM AND 0.288 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATION	ASTM B209 ASSN STD SINGLE MATERIAL RESPONSE
MATERIAL	ALUMINUM ALLOY 6061
PROPRIETARY CHARACTERISTICS	PACS
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH	0.720 INCHES MINIMUM AND 0.780 INCHES MAXIMUM
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH	0.720 INCHES MINIMUM AND 0.780 INCHES MAXIMUM
OVERALL LENGTH	4.470 INCHES MINIMUM AND 4.530 INCHES MAXIMUM
OVERALL WIDTH	2.970 INCHES MINIMUM AND 3.030 INCHES MAXIMUM
STYLE DESIGNATOR	NON-CIRCULAR W/BOLT HOLES
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	MIL-C-5541,CL 1 MIL SPEC SINGLE TREATMENT RESPONSE
SURFACE TREATMENT	CHROMATE

Click here to Register for Free 30-day Trial