|
|
|
National Stock Number:
5365-01-322-5074
Federal Supply Class:
5365
National Item Identification Number:
013225074
Description:
SPACER,PLATE
Detail:
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.
|
Manufacturer Information:
| 8623651-01 | 65459 | LANDOLL COMPANY, LLC | | 8623651-01 | 98750 | SAN ANTONIO AIR LOGISTICS CENTER |
|
Techincal Specification:
| BOLT HOLE CENTERLINE TO NEAREST EDGE DISTANCE | 0.750 INCHES NOMINAL | | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 3.840 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A569 ASSN STD SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL | | PROPRIETARY CHARACTERISTICS | PACS | | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH | 0.750 INCHES NOMINAL | | OVERALL LENGTH | 9.190 INCHES NOMINAL | | OVERALL WIDTH | 2.000 INCHES NOMINAL | | SLOT LENGTH | 0.750 INCHES NOMINAL | | SLOT QUANTITY | 3 | | SLOT WIDTH | 0.406 INCHES NOMINAL | | SPECIAL FEATURES | 2 CUT OUT 5.188 IN. CENTER TO CENTER DISTANCE ALONG LENGTH | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | 595,COLOR 24052 FED STD SINGLE TREATMENT RESPONSE | | SURFACE TREATMENT | ENAMEL SEMIGLOSS |
|
|