|
|
|
National Stock Number:
5365-01-322-3565
Federal Supply Class:
5365
National Item Identification Number:
013223565
Description:
SHIM
Detail:
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE; WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and BEARING, WASHER, THRUST.
|
Manufacturer Information:
| 820-5787368H02 | 53711 | NAVAL SEA SYSTEMS COMMAND | | LL-HQ6-5135 | 14153 | DEFENSE LOGISTICS AGENCY DBA DEFENSE SUPPLY CENTER PHILADELPHIA | | RO0024 | 13873 | DLA AVIATION | | LO-013223565 | 16236 | DLA LAND AND MARITIME DBA ENGINEERING AND TECHNICAL SUPPORT DIV DOCUMENT STANDARDIZATION DIVISION (VENDOR ITEM DRAWINGS) | | LO1610 | 16236 | DLA LAND AND MARITIME DBA ENGINEERING AND TECHNICAL SUPPORT DIV DOCUMENT STANDARDIZATION DIVISION (VENDOR ITEM DRAWINGS) |
|
Techincal Specification:
| APERTURE DIAMETER | 0.752 INCHES MINIMUM AND 0.770 INCHES MAXIMUM | | CONSTRUCTION | LAMINATED | | CRITICALITY CODE JUSTIFICATION | ZZZY | | LAMINATION QUANTITY | 63 | | LAMINATION THICKNESS | 0.002 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-B-613,1/4 HARD OR HARDER FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | COPPER ALLOY 260 | | OUTSIDE DIAMETER | 1.375 INCHES MINIMUM AND 1.475 INCHES MAXIMUM | | REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS | REFERENCE NUMBER DIFFERENTIATING MATERIAL WILL BE IN ACCORDANCE WITH NAVAL INVENTORY CONTROL POINT ACTIVITY HX QUALITY CONTROL. MANUFACTURING AND TESTING SPECIFICATIONS AVAILABLE AT THE DLA ICP | | SPECIAL FEATURES | ITEM MUST COMPLY WITH REQUIREMENTS OF DEFENSE SUPPLY CENTER RICHMOND PRODUCTION STANDARD NO. LO-013223565 | | SPECIAL TEST FEATURES | SPECIAL QUALITY CONTROL TESTING | | STYLE DESIGNATOR | CIRCULAR | | TEST DATA DOCUMENT | 81349-MIL-P-23199 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
|
|