|
|
|
National Stock Number:
5365-01-321-8073
Federal Supply Class:
5365
National Item Identification Number:
013218073
Description:
SPACER,PLATE
Detail:
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.
|
Manufacturer Information:
| 32-P19509B003 | 1VPW8 | GENERAL DYNAMICS MISSION SYSTEMS, INC. | | 32-P19509B003 | 24469 | CAES MISSION SYSTEMS LLC | | 32-P19509B003 | 55719 | IDSC HOLDINGS LLC | | 32-P19509B003 | 73346 | FORGED STEEL PRODUCTS CO | | 32-P19509B003 | 94990 | MOTOROLA INC. DBA INTEGRATED INFORMATION SYSTEMS GROUP |
|
Techincal Specification:
| BOLT HOLE QUANTITY | 4 | | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 1.040 INCHES NOMINAL | | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | 1.040 INCHES NOMINAL | | HOLE DIAMETER | 0.156 INCHES NOMINAL | | OVERALL LENGTH | 2.120 INCHES NOMINAL | | OVERALL WIDTH | 1.250 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-C-576,TEMPER SOFT FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | COPPER ALLOY | | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH | 0.100 INCHES NOMINAL | | PRECIOUS MATERIAL AND LOCATION | OVERALL SILVER | | PRECIOUS MATERIAL | SILVER | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-S-365,TY 2,GR B FED SPEC SINGLE TREATMENT RESPONSE | | SURFACE TREATMENT | SILVER |
|
|