|
|
|
National Stock Number:
5365-01-321-4836
Federal Supply Class:
5365
National Item Identification Number:
013214836
Description:
SHIM
Detail:
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE; WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and BEARING, WASHER, THRUST.
|
Manufacturer Information:
| 8040001206-1 | 57057 | NAVCOM DEFENSE ELECTRONICS, INC. |
|
Techincal Specification:
| HOLE DIAMETER | 0.209 INCHES NOMINAL | | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH | 0.750 INCHES NOMINAL | | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH | 0.187 INCHES NOMINAL | | OVERALL LENGTH | 1.500 INCHES NOMINAL | | OVERALL THICKNESS | 0.025 INCHES NOMINAL | | OVERALL WIDTH | 1.120 INCHES NOMINAL | | PART NAME ASSIGNED BY CONTROLLING AGENCY | SHIM, BLOWER | | SPECIAL FEATURES | FINISH: CLEAN WITH A DEOXIDIZING SOLUTION TO MEET THE REQUIREMENT OF MIL-E-5400 |
|
|