|
|
|
National Stock Number:
5365-01-319-0414
Federal Supply Class:
5365
National Item Identification Number:
013190414
Description:
SPACER,PLATE
Detail:
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.
|
Manufacturer Information:
| 250494-7 | 10001 | NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER |
|
Techincal Specification:
| APERTURE LENGTH | 6.000 INCHES NOMINAL | | APERTURE WIDTH | 4.000 INCHES NOMINAL | | BOLT HOLE QUANTITY | 4 | | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | 2.000 INCHES NOMINAL | | HOLE DIAMETER | 0.750 INCHES NOMINAL | | INSIDE CORNER RADIUS | 0.500 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | 49-S-1,CL B,CAGEC 10001 MFR REF SINGLE MATERIAL RESPONSE | | OVERALL WIDTH | 5.000 INCHES NOMINAL | | MATERIAL | STEEL | | OUTSIDE CORNER RADIUS | 0.125 INCHES NOMINAL | | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH | 1.500 INCHES NOMINAL | | OVERALL LENGTH | 10.000 INCHES NOMINAL | | SPECIAL FEATURES | RIGHT SIDE | | STYLE DESIGNATOR | NON-CIRCULAR W/BOLT HOLES |
|
|