|
|
|
National Stock Number:
5365-01-318-4725
Federal Supply Class:
5365
National Item Identification Number:
013184725
Description:
SPACER,PLATE
Detail:
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.
|
Manufacturer Information:
| 4075578 | 77445 | RTX CORPORATION | | 5365PL0838451 | 9009H | INSPEKTORAT WSPARCIA SIL ZBROJNYCH |
|
Techincal Specification:
| BOLT HOLE CENTERLINE TO NEAREST EDGE DISTANCE | 0.250 INCHES NOMINAL | | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 0.550 INCHES NOMINAL | | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | 0.500 INCHES NOMINAL | | HOLE DIAMETER | 0.192 INCHES MINIMUM AND 0.194 INCHES MAXIMUM | | OVERALL THICKNESS | 0.100 INCHES MINIMUM AND 0.102 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5759 ASSN STD SINGLE MATERIAL RESPONSE | | MATERIAL | COBALT COMP L-605 | | SPECIAL FEATURES | THIRD BOLT HOLE HAS MINIMUM DIAMETER OF 0.250 IN. AND MAXIMUM DIAMETER OF 0.252 IN.; THIRD BOLT HOLE HAS NOMINAL DISTANCE OF 0.265 IN. FROM BOLT HOLE CENTERLINE TO NEAREST EDGE | | STYLE DESIGNATOR | ISOSCELES TRIANGLE |
|
|