|
|
|
National Stock Number:
5365-01-317-4036
Federal Supply Class:
5365
National Item Identification Number:
013174036
Description:
SPACER,PLATE
Detail:
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.
|
Manufacturer Information:
| A343A539-101 | 88818 | KEARFOTT CORPORATION |
|
Techincal Specification:
| APERTURE DIAMETER | 0.077 INCHES MINIMUM AND 0.083 INCHES MAXIMUM | | OVERALL LENGTH | 0.480 INCHES MINIMUM AND 0.520 INCHES MAXIMUM | | OVERALL WIDTH | 0.250 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | ASTM D4066,TYPE PA121G ASSN STD 1ST MATERIAL RESPONSE OR L-P-410 FED SPEC 1ST MATERIAL RESPONSE OR HSL-NC-10,CAGEC 88818 MFR REF 2ND MATERIAL RESPONSE | | MATERIAL | PLASTIC OR PLASTIC POLYHEXAMETHYLENE ADIPAMIDE | | SLOT LENGTH | 0.100 INCHES NOMINAL | | SLOT QUANTITY | 4 | | SLOT WIDTH | 0.050 INCHES NOMINAL | | SPECIAL FEATURES | SLOTS ALONG EADH SIDE OF WIDTH |
|
|