5365-01-307-8659, SPACER,PLATE

National Stock Number:
5365-01-307-8659

Federal Supply Class:
5365

National Item Identification Number:
013078659

Description:
SPACER,PLATE

Detail:
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.

Manufacturer Information:

3537678-001	S3465	BAE SYSTEMS HAGGLUNDS AB
92071-991	076M6	AMZ ALABAMA INC.
92071-991	0BAT5	U.S. DEFENSE SERVICES, INC.

Techincal Specification:

CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH	29.5 MILLIMETERS MINIMUM AND 30.5 MILLIMETERS MAXIMUM
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH	343.5 MILLIMETERS MINIMUM AND 344.5 MILLIMETERS MAXIMUM
LARGEST BOLT HOLE DIAMETER	22.7 MILLIMETERS MINIMUM AND 23.3 MILLIMETERS MAXIMUM
LARGEST BOLT HOLE QUANTITY	2
MATERIAL DOCUMENT AND CLASSIFICATION	1147-32 TY 3,CAGEC S3465 MFR REF SINGLE MATERIAL RESPONSE
MATERIAL	STEEL
PROPRIETARY CHARACTERISTICS	PACS
OUTSIDE CORNER RADIUS	5.0 MILLIMETERS NOMINAL
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH	20.0 MILLIMETERS NOMINAL
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH	23.0 MILLIMETERS NOMINAL
OVERALL LENGTH	390.0 MILLIMETERS NOMINAL
OVERALL WIDTH	70.0 MILLIMETERS NOMINAL
SMALLEST BOLT HOLE DIAMETER	8.7 MILLIMETERS MINIMUM AND 9.3 MILLIMETERS MAXIMUM
SMALLEST BOLT HOLE QUANTITY	4
SPECIAL FEATURES	COLOR NO. 326 H CAGEC S3465

Click here to Register for Free 30-day Trial