5365-01-293-6669, SPACER,PLATE

National Stock Number:
5365-01-293-6669

Federal Supply Class:
5365

National Item Identification Number:
012936669

Description:
SPACER,PLATE

Detail:
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.

Manufacturer Information:

702060-5	20418	DRS SUSTAINMENT SYSTEMS, INC. USE CAGE CODE 98255 FOR CATALOGING
702060-5	98255	DRS SUSTAINMENT SYSTEMS INC

Techincal Specification:

APERTURE DIAMETER	0.437 INCHES MINIMUM AND 0.448 INCHES MAXIMUM
BOLT HOLE QUANTITY	4
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH	0.496 INCHES MINIMUM AND 0.504 INCHES MAXIMUM
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH	0.496 INCHES MINIMUM AND 0.504 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATION	QQ-A-250/11,TEMPER T651 FED SPEC SINGLE MATERIAL RESPONSE
MATERIAL	ALUMINUM ALLOY 6061
PROPRIETARY CHARACTERISTICS	PACS
OUTSIDE CORNER BEVEL LENGTH ALONG LENGTH	0.070 INCHES MINIMUM AND 0.100 INCHES MAXIMUM
OUTSIDE CORNER BEVEL LENGTH ALONG WIDTH	0.070 INCHES MINIMUM AND 0.100 INCHES MAXIMUM
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH	0.173 INCHES MINIMUM AND 0.177 INCHES MAXIMUM
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH	0.173 INCHES MINIMUM AND 0.177 INCHES MAXIMUM
OVERALL LENGTH	0.850 INCHES NOMINAL
OVERALL WIDTH	0.850 INCHES NOMINAL
SPECIAL FEATURES	FOUR THREADED HOLES 0.112-40 UNC 2B THRU; ONE HOLE 0.112-40 UNC 2B FROM OUTSIDE THICKNESS THRU TO THE APERTURE
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	MIL-A-8625,TYPE 2,CLASS 2 MIL SPEC SINGLE TREATMENT RESPONSE
SURFACE TREATMENT	ANODIZE

Click here to Register for Free 30-day Trial