|
|
|
National Stock Number:
5365-01-253-9053
Federal Supply Class:
5365
National Item Identification Number:
012539053
Description:
SPACER,PLATE
Detail:
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.
|
Manufacturer Information:
| 3867336-1 | 59211 | PARKER-HANNIFIN CORPORATION | | 3867336-1 | 82106 | PARKER-HANNIFIN CORPORATION | | 3867336-1 | 93835 | PARKER HANNIFIN CORPORATION |
|
Techincal Specification:
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763,COND 1/4 HARD FED SPEC 1ST MATERIAL RESPONSE OR QQ-S-763,COND 1/4 HARD FED SPEC 2ND MATERIAL RESPONSE | | MATERIAL | STEEL COMP 302 OR STEEL COMP 304 | | PROPRIETARY CHARACTERISTICS | PACS | | OVERALL LENGTH | 0.438 INCHES NOMINAL | | OVERALL WIDTH | 0.325 INCHES MINIMUM AND 0.335 INCHES MAXIMUM | | SPECIAL FEATURES | C SHAPED WITH SLOT AT ONE END 0.145 IN. MIN,0.155 IN. MAX WIDE | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | PS-13001,CAGEC 76301 MFR REF SINGLE TREATMENT RESPONSE | | SURFACE TREATMENT | PASSIVATE |
|
|