5365-01-217-4660, SHIM

National Stock Number:
5365-01-217-4660

Federal Supply Class:
5365

National Item Identification Number:
012174660

Description:
SHIM

Detail:
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE; WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and BEARING, WASHER, THRUST.

Manufacturer Information:

320771-2

79318

MEGGITT NORTH HOLLYWOOD INC

Techincal Specification:

APERTURE DIAMETER	1.190 INCHES MINIMUM AND 1.210 INCHES MAXIMUM
BOLT HOLE QUANTITY	4
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH	1.320 INCHES NOMINAL
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH	1.160 INCHES NOMINAL
CONSTRUCTION	ONE-PIECE
HOLE DIAMETER	0.159 INCHES MINIMUM AND 0.173 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATION	MIL-S-5059 MIL SPEC ALL MATERIAL RESPONSES OR QQ-S-766 FED SPEC ALL MATERIAL RESPONSES
MATERIAL	STEEL COMP 301 OR STEEL COMP 302 OR STEEL COMP 304
PROPRIETARY CHARACTERISTICS	PACS
OUTSIDE CORNER BEVEL LENGTH ALONG LENGTH	0.040 INCHES MINIMUM AND 0.060 INCHES MAXIMUM
OUTSIDE CORNER BEVEL LENGTH ALONG WIDTH	0.040 INCHES MINIMUM AND 0.060 INCHES MAXIMUM
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH	0.144 INCHES NOMINAL
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH	1.144 INCHES NOMINAL
OVERALL LENGTH	1.595 INCHES MINIMUM AND 1.610 INCHES MAXIMUM
OVERALL WIDTH	1.425 INCHES MINIMUM AND 1.450 INCHES MAXIMUM
STYLE DESIGNATOR	NON-CIRCULAR W/BOLT HOLES
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	SPS 265,FSCM 79318 MFR REF SINGLE TREATMENT RESPONSE
SURFACE TREATMENT	PASSIVATE

Click here to Register for Free 30-day Trial