|
|
|
National Stock Number:
5365-01-216-7460
Federal Supply Class:
5365
National Item Identification Number:
012167460
Description:
SHIM
Detail:
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE; WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and BEARING, WASHER, THRUST.
|
Manufacturer Information:
| 2-41340-1 | 0JRC1 | NORTHROP GRUMMAN TECHNICAL SERVICES, INC. | | 2-41340-1 | 76823 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | 2-41340-1 | 79U29 | NORTHROP GRUMMAN SYSTEMS CORPORATION |
|
Techincal Specification:
| APERTURE LENGTH | 2.820 INCHES NOMINAL | | APERTURE WIDTH | 2.640 INCHES NOMINAL | | BOLT HOLE QUANTITY | 4 | | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 3.375 INCHES NOMINAL | | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | 2.750 INCHES NOMINAL | | CONSTRUCTION | LAMINATED | | HOLE DIAMETER | 0.228 INCHES NOMINAL | | INSIDE CORNER RADIUS | 0.320 INCHES NOMINAL | | LAMINATION QUANTITY | 31 | | LAMINATION THICKNESS | 0.003 INCHES NOMINAL | | OUTSIDE CORNER RADIUS | 0.320 INCHES NOMINAL | | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH | 0.320 INCHES NOMINAL | | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH | 0.320 INCHES NOMINAL | | OVERALL LENGTH | 4.060 INCHES NOMINAL | | OVERALL WIDTH | 3.440 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-B-5697 MIL SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | COPPER ALLOY 260 | | STYLE DESIGNATOR | NON-CIRCULAR W/BOLT HOLES |
|
|