3120-01-193-1937 BUSHING,SLEEVE Index 5365-01-193-1939 SPACER,SLEEVE

National Stock Number:
5365-01-193-1938

Federal Supply Class:
5365

National Item Identification Number:
011931938

Description:
SPACER,SLEEVE

Detail:
A tubular shaped item with a round or hexagon peripheral shape having two flat bearing surfaces perpendicular to the axis of the centrally located hole. It is designed to maintain a predetermined distance between assembled parts. The item may be with or without flange(s) of any peripheral shape. The overall length must exceed 25 percent of the outside diameter or distance across peripheral flats of the boday. (When the length, outside diamete, and/or distance across peripheral flats are designed as a tolerance, the maximum dimension will be used to determine compliance). For items having other than a round or hexagon peripheral shape, see SPACER, PLATE. Excludes items with lubricating features, see BEARING, SLEEVE and BUSHING, SLEEVE. See also BUSHING, TAPERED; SPACER, RING; WASHER, FLAT; and WASHER, (as modified).


Manufacturer Information:
LD152-0042-094643999THE BOEING COMPANY


Techincal Specification:
BODY INSIDE DIAMETER0.3150 INCHES MINIMUM AND 0.3200 INCHES MAXIMUM
BODY OUTSIDE DIAMETER0.4150 INCHES MINIMUM AND 0.4250 INCHES MAXIMUM
CORNER SHAPEROUND LEFT FLANGE BODY CORNER
CORNER SHAPEROUND RIGHT FLANGE BODY CORNER
CORNER SHAPESQUARE INSIDE LEFT CORNER
CORNER SHAPESQUARE INSIDE RIGHT CORNER
CORNER SHAPESQUARE OUTSIDE RIGHT CORNER
CORNER SHAPESQUARE RIGHT FLANGE OUTSIDE LEFT CORNER
CORNER SHAPESQUARE LEFT FLANGE OUTSIDE RIGHT CORNER
CORNER SHAPESQUARE OUTSIDE LEFT CORNER
LEFT FLANGE OUTSIDE DIAMETER1.2300 INCHES MINIMUM AND 1.2350 INCHES MAXIMUM
LEFT FLANGE WIDTH0.0620 INCHES NOMINAL
OVERALL LENGTH0.9410 INCHES MINIMUM AND 0.9460 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-200/3,T4 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
MATERIALALUMINUM ALLOY 2024 OVERALL
RIGHT FLANGE OUTSIDE DIAMETER1.2300 INCHES MINIMUM AND 1.2350 INCHES MAXIMUM
RIGHT FLANGE WIDTH0.0620 INCHES NOMINAL
SPECIAL FEATURESFLANGES ARE 0.1560 IN. FROM EACH END
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-A-8625,TY 2,CL 1 MIL SPEC 1ST TREATMENT RESPONSE AND TT-P-1757 FED SPEC 2ND TREATMENT RESPONSE OVERALL
SURFACE TREATMENTANODIZE AND CHROMATE ZINC OVERALL


Click here to Register for Free 30-day Trial

© 2026 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us