|
|
|
National Stock Number:
5365-01-184-1947
Federal Supply Class:
5365
National Item Identification Number:
011841947
Description:
SHIM
Detail:
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE; WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and BEARING, WASHER, THRUST.
|
Manufacturer Information:
| 13214E2770 | 97403 | CECOM LR CENTER |
|
Techincal Specification:
| MATERIAL | STEEL | | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH | 5.120 INCHES NOMINAL | | OVERALL WIDTH | 1.750 INCHES NOMINAL | | SPECIAL FEATURES | MATERIAL IS SPECIFICALLY STEEL CARBON,SPEC ASTM A283,CLASS D .250; PLATING,CADMIUM,TYPE II,CLASS 1,SPEC QQ-P-416;ALT ZINC COATING CLASS FE/ZN 13 TYPE II ASTM B633;REMOVE ALL BURRS AND SHARP EDGES;APPLY PER MIL-STD-130 97403-13214E2770 | | STYLE DESIGNATOR | NON-CIRCULAR W/BOLT HOLES |
|
|