|
|
|
National Stock Number:
5365-01-119-9937
Federal Supply Class:
5365
National Item Identification Number:
011199937
Description:
SPACER,RING
Detail:
A circular-shaped item designed to maintain predetermined distance between assembled parts and/or for distributing pressure or preventing endwise movement between member parts. It has a solid cross-section and two flat parallel bearing surfaces. The distance between the bearing surfaces perpendicular to the axis of the centrally located hole shall not exceed 25 percent of the outside diameter. The diameter of the centrally located hole must exceed 75 percent of the outside diameter. Excludes laminated items. For items manufactured from impregnated graphite or lubricated nonmetallic materials, excluding felt or plastics, see GASKET. For items manufactured from lubricated plastics, see BEARING, WASHER, THRUST. For items manufactured from lubricated felt, see FELT, MECHANICAL, PREFORMED. Excludes DISK, VALVE; INSULATOR WASHER; and SHIM. See also SPACER, PLATE and SPACER, SLEEVE.
|
Manufacturer Information:
| 196B7671-3 | 05606 | GENERAL DYNAMICS-OTS, INC. | | RP2200-G06 | 06324 | GLENAIR, INC. |
|
Techincal Specification:
| INSIDE DIAMETER | 1.680 INCHES MINIMUM AND 1.700 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-225/9,T6 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-A-200/11,T6 FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | ALUMINUM ALLOY 7075 | | OUTSIDE DIAMETER | 1.820 INCHES MINIMUM AND 1.840 INCHES MAXIMUM | | OVERALL THICKNESS | 0.298 INCHES MINIMUM AND 0.302 INCHES MAXIMUM | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-A-8625,TYPE 2,CLASS 2 MIL SPEC SINGLE TREATMENT RESPONSE | | SURFACE TREATMENT | ANODIZE |
|
|