|
|
|
National Stock Number:
5365-01-114-9222
Federal Supply Class:
5365
National Item Identification Number:
011149222
Description:
SPACER,PLATE
Detail:
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.
|
Manufacturer Information:
| 716350-4 | 99167 | HAMILTON SUNDSTRAND CORPORATION |
|
Techincal Specification:
| APERTURE DIAMETER | 3.378 INCHES MINIMUM AND 3.408 INCHES MAXIMUM | | BOLT CIRCLE DIAMETER | 3.797 INCHES MINIMUM AND 3.827 INCHES MAXIMUM | | BOLT HOLE QUANTITY | 6 | | HOLE DIAMETER | 0.205 INCHES MINIMUM AND 0.229 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS5515 ASSN STD 1ST MATERIAL RESPONSE OR AMS5516 ASSN STD 1ST MATERIAL RESPONSE OR AMS5513 ASSN STD 2ND MATERIAL RESPONSE | | PROPRIETARY CHARACTERISTICS | PACS | | OUTSIDE CORNER RADIUS | 0.266 INCHES MINIMUM AND 0.296 INCHES MAXIMUM | | OUTSIDE CORNER INVERTED RADIUS | 0.454 INCHES MINIMUM AND 0.484 INCHES MAXIMUM | | OVERALL WIDTH | 4.359 INCHES MINIMUM AND 4.389 INCHES MAXIMUM | | SIDE RADIUS FROM GASKET CENTER | 1.900 INCHES MINIMUM AND 1.910 INCHES MAXIMUM | | STYLE DESIGNATOR | NON-CIRCULAR W/APERTURE | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | PN14.10,FSCM 99167 MFR REF SINGLE TREATMENT RESPONSE | | SURFACE TREATMENT | PASSIVATE |
|
|