|
|
|
National Stock Number:
5365-01-112-0534
Federal Supply Class:
5365
National Item Identification Number:
011120534
Description:
SPACER,SLEEVE
Detail:
A tubular shaped item with a round or hexagon peripheral shape having two flat bearing surfaces perpendicular to the axis of the centrally located hole. It is designed to maintain a predetermined distance between assembled parts. The item may be with or without flange(s) of any peripheral shape. The overall length must exceed 25 percent of the outside diameter or distance across peripheral flats of the boday. (When the length, outside diamete, and/or distance across peripheral flats are designed as a tolerance, the maximum dimension will be used to determine compliance). For items having other than a round or hexagon peripheral shape, see SPACER, PLATE. Excludes items with lubricating features, see BEARING, SLEEVE and BUSHING, SLEEVE. See also BUSHING, TAPERED; SPACER, RING; WASHER, FLAT; and WASHER, (as modified).
|
Manufacturer Information:
| 6964644-2 | 07421 | L3HARRIS INTERSTATE ELECTRONICS CORPORATION |
|
Techincal Specification:
| MATERIAL | STEEL COMP 304 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL | | OVERALL LENGTH | 0.4230 INCHES MINIMUM AND | | 0.4590 INCHES MAXIMUM | | BODY INSIDE DIAMETER | 0.2810 INCHES NOMINAL | | FLANGE OUTSIDE DIAMETER | 0.5620 INCHES NOMINAL | | FLANGE WIDTH | 0.1670 INCHES MINIMUM AND | | 0.1770 INCHES MAXIMUM | | END TO FLANGE DISTANCE | 0.0900 INCHES MINIMUM AND | | 0.1100 INCHES MAXIMUM | | CORNER SHAPE | SQUARE ALL CORNERS | | SPECIAL FEATURES | BODY OD DIFFERENT SIZES EACH SIDE OF FLANGE,LH SIDE 0.437 IN. DIA AND COUNTERBORED 0.375 IN. DIA BY 0.100 IN. DEEP,RH SIDE 0.497 IN. DIA AND COUNTERBORED 0.468 IN. DIA BY 0.169 IN. DEEP | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 07421 | | DESIGN CONTROL REFERENCE | 6964644-2 |
|
|