|
|
|
National Stock Number:
5365-01-100-6538
Federal Supply Class:
5365
National Item Identification Number:
011006538
Description:
SHIM
Detail:
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE; WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and BEARING, WASHER, THRUST.
|
Manufacturer Information:
| 03190800 | 61080 | HATZ DIESEL OF AMERICA INC | | 82197 | 16004 | DAVEY COMPRESSOR CO DIV OF KECO INDUSTRIES INC |
|
Techincal Specification:
| BOLT HOLE QUANTITY | 4 | | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 56.0 MILLIMETERS NOMINAL | | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | 56.0 MILLIMETERS NOMINAL | | CONSTRUCTION | ONE-PIECE | | HOLE DIAMETER | 8.4 MILLIMETERS NOMINAL | | MATERIAL | STEEL | | OUTSIDE CORNER RADIUS | 9.0 MILLIMETERS NOMINAL | | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH | 9.0 MILLIMETERS NOMINAL | | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH | 9.0 MILLIMETERS NOMINAL | | OVERALL LENGTH | 74.0 MILLIMETERS NOMINAL | | OVERALL WIDTH | 74.0 MILLIMETERS NOMINAL | | SPECIAL FEATURES | IRREGULAR SHAPED APERTURE CENTRALLY LOCATED |
|
|