|
|
|
National Stock Number:
5365-01-094-4138
Federal Supply Class:
5365
National Item Identification Number:
010944138
Description:
SHIM
Detail:
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE; WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and BEARING, WASHER, THRUST.
|
Manufacturer Information:
| 9184M41P06 | 07482 | GENERAL ELECTRIC COMPANY |
|
Techincal Specification:
| BOLT HOLE CENTERLINE TO NEAREST EDGE DISTANCE | 0.350 INCHES MINIMUM AND 0.370 INCHES MAXIMUM | | BOLT HOLE QUANTITY | 2 | | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 0.820 INCHES MINIMUM AND 0.840 INCHES MAXIMUM | | CONSTRUCTION | ONE-PIECE | | HOLE DIAMETER | 0.363 INCHES MINIMUM AND 0.377 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-T-9046,TYPE 1,COMP B MIL SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | TITANIUM ALLOY | | OUTSIDE CORNER RADIUS | 0.350 INCHES MINIMUM AND 0.370 INCHES MAXIMUM | | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH | 0.350 INCHES MINIMUM AND 0.370 INCHES MAXIMUM | | OVERALL LENGTH | 1.520 INCHES MINIMUM AND 1.580 INCHES MAXIMUM | | OVERALL WIDTH | 0.700 INCHES MINIMUM AND 0.740 INCHES MAXIMUM | | STYLE DESIGNATOR | NON-CIRCULAR W/CORNER RADIUS |
|
|