|
|
|
National Stock Number:
5365-01-093-9405
Federal Supply Class:
5365
National Item Identification Number:
010939405
Description:
SPACER,PLATE
Detail:
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.
|
Manufacturer Information:
| 3169174-1 | 59364 | HONEYWELL INTERNATIONAL INC. | | 3169174-1 | 99193 | HONEYWELL INTERNATIONAL INC. |
|
Techincal Specification:
| APERTURE DIAMETER | 1.250 INCHES NOMINAL | | BOLT HOLE QUANTITY | 4 | | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 1.250 INCHES NOMINAL | | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | 1.250 INCHES NOMINAL | | FSC APPLICATION DATA | REGULATOR,AIR PRESSURE,AIRCRAFT | | HARDNESS RATING | 31.0 ROCKWELL C MINIMUM AND 39.0 ROCKWELL C MAXIMUM | | HOLE DIAMETER | 0.210 INCHES MINIMUM AND 0.220 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5643 ASSN STD SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL COMP 630 | | OUTSIDE CORNER RADIUS | 2.240 INCHES MINIMUM AND 2.260 INCHES MAXIMUM | | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH | 0.255 INCHES NOMINAL | | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH | 0.255 INCHES NOMINAL | | OVERALL LENGTH | 1.740 INCHES MINIMUM AND 1.780 INCHES MAXIMUM | | OVERALL WIDTH | 1.740 INCHES MINIMUM AND 1.780 INCHES MAXIMUM | | SPECIAL FEATURES | APERTURE COUNTERSUNK (ON ONE SIDE) 0.050 IN. NOMINAL DEPTH AND EACH BOLT HOLE IS COUNTERSUNK,(ON ONE SIDE) 0.395 IN. NOMINAL DIA. AND 100.0 DEG |
|
|