5365-01-065-1734, SPACER,PLATE

National Stock Number:
5365-01-065-1734

Federal Supply Class:
5365

National Item Identification Number:
010651734

Description:
SPACER,PLATE

Detail:
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.

Manufacturer Information:

898770-2	3B150	RAYTHEON COMPANY
898770-2	49956	RAYTHEON COMPANY
898770-2	54X10	RAYTHEON COMPANY

Techincal Specification:

APERTURE LENGTH	0.896 INCHES MINIMUM AND 0.904 INCHES MAXIMUM
APERTURE WIDTH	0.396 INCHES MINIMUM AND 0.404 INCHES MAXIMUM
BOLT HOLE QUANTITY	4
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH	1.200 INCHES MINIMUM AND 1.240 INCHES MAXIMUM
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH	1.260 INCHES MINIMUM AND 1.300 INCHES MAXIMUM
HOLE DIAMETER	0.169 INCHES MINIMUM AND 0.172 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATION	QQ-A-200/9,T5 FED SPEC SINGLE MATERIAL RESPONSE
MATERIAL	ALUMINUM ALLOY 6063
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH	0.170 INCHES MINIMUM AND 0.175 INCHES MAXIMUM
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH	0.200 INCHES MINIMUM AND 0.205 INCHES MAXIMUM
OVERALL LENGTH	1.610 INCHES MINIMUM AND 1.640 INCHES MAXIMUM
OVERALL WIDTH	1.610 INCHES MINIMUM AND 1.640 INCHES MAXIMUM
SPECIAL FEATURES	OUTSIDE CORNERS ARE BEVELED,0.120 TO 0.130 IN. LONG AT AN ANGLE OF 45.0 DEG
STYLE DESIGNATOR	NON-CIRCULAR W/BOLT HOLES
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	MIL-C-5541,CL 3 MIL SPEC SINGLE TREATMENT RESPONSE
SURFACE TREATMENT	CHROMATE

Click here to Register for Free 30-day Trial