5365-01-064-0036, SPACER,PLATE

National Stock Number:
5365-01-064-0036

Federal Supply Class:
5365

National Item Identification Number:
010640036

Description:
SPACER,PLATE

Detail:
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.

Manufacturer Information:

1818075

03956

NORTHROP GRUMMAN SYSTEMS CORPORATION

Techincal Specification:

APERTURE DIAMETER	0.540 INCHES MINIMUM AND 0.580 INCHES MAXIMUM
BOLT HOLE QUANTITY	2
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH	1.182 INCHES MINIMUM AND 1.192 INCHES MAXIMUM
HOLE DIAMETER	0.540 INCHES MINIMUM AND 0.580 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATION	QQ-S-764,COND A,COLD FINISH FED SPEC SINGLE MATERIAL RESPONSE
MATERIAL	STEEL COMP 303
PROPRIETARY CHARACTERISTICS	PACS
OUTSIDE CORNER BEVEL LENGTH ALONG LENGTH	0.230 INCHES MINIMUM AND 0.270 INCHES MAXIMUM
OUTSIDE CORNER BEVEL LENGTH ALONG WIDTH	0.230 INCHES MINIMUM AND 0.270 INCHES MAXIMUM
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH	0.420 INCHES MINIMUM AND 0.460 INCHES MAXIMUM
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH	0.155 INCHES MINIMUM AND 0.159 INCHES MAXIMUM
OVERALL LENGTH	1.480 INCHES MINIMUM AND 1.520 INCHES MAXIMUM
OVERALL WIDTH	0.860 INCHES MINIMUM AND 0.900 INCHES MAXIMUM
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE
SURFACE TREATMENT	PASSIVATE

Click here to Register for Free 30-day Trial