5365-01-035-0813, SPACER,SLEEVE

National Stock Number:
5365-01-035-0813

Federal Supply Class:
5365

National Item Identification Number:
010350813

Description:
SPACER,SLEEVE

Detail:
A tubular shaped item with a round or hexagon peripheral shape having two flat bearing surfaces perpendicular to the axis of the centrally located hole. It is designed to maintain a predetermined distance between assembled parts. The item may be with or without flange(s) of any peripheral shape. The overall length must exceed 25 percent of the outside diameter or distance across peripheral flats of the boday. (When the length, outside diamete, and/or distance across peripheral flats are designed as a tolerance, the maximum dimension will be used to determine compliance). For items having other than a round or hexagon peripheral shape, see SPACER, PLATE. Excludes items with lubricating features, see BEARING, SLEEVE and BUSHING, SLEEVE. See also BUSHING, TAPERED; SPACER, RING; WASHER, FLAT; and WASHER, (as modified).

Manufacturer Information:

725507	86831	SAFRAN ELECTRONICS & DEFENSE, AVIONICS USA, LLC
725507	96124	TRANSDIGM INC

Techincal Specification:

BODY INSIDE DIAMETER	0.5000 INCHES MINIMUM AND 0.5040 INCHES MAXIMUM
BODY OUTSIDE DIAMETER	0.6620 INCHES MINIMUM AND 0.6680 INCHES MAXIMUM
CORNER SHAPE	CHAMFERED INSIDE LEFT CORNER
CORNER SHAPE	ROUND OUTSIDE RIGHT CORNER
CORNER SHAPE	SQUARE OUTSIDE LEFT CORNER
CORNER SHAPE	SQUARE INSIDE RIGHT CORNER
FLANGE WIDTH	0.2460 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM
INTERIOR FLANGE HOLE DIAMETER	0.3770 INCHES MINIMUM AND 0.3810 INCHES MAXIMUM
INTERIOR FLANGE WIDTH	0.8690 INCHES NOMINAL
LEFT INTERNAL FLANGE HOLE DIAMETER	0.4980 INCHES MINIMUM AND 0.5020 INCHES MAXIMUM
LEFT INTERNAL FLANGE WIDTH	0.2100 INCHES MINIMUM AND 0.2120 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATION	QQ-A-225/8,T6 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
MATERIAL	ALUMINUM ALLOY 6061 OVERALL
PROPRIETARY CHARACTERISTICS	PACS
RIGHT INTERNAL FLANGE HOLE DIAMETER	0.4330 INCHES MINIMUM AND 0.4410 INCHES MAXIMUM
RIGHT INTERNAL FLANGE WIDTH	0.0440 INCHES MINIMUM AND 0.0540 INCHES MAXIMUM
SPECIAL FEATURES	FLANGE OUTSIDE RIGHT CORNER RADIUS,0.0250 TO 0.0350 IN.; RIGHT END BODY CORNER RADIUS,0.0150 TO 0.0250 IN.; INTERIOR FLANGE CORNERS HAVE A 32.0 MICROINCH FINISH; AND FLANGE HAS A GROOVE,0.092 IN. WIDE AND 0.0545 IN. DEEP
SURFACE TREATMENT	ANODIZE OVERALL

Click here to Register for Free 30-day Trial