|
|
|
National Stock Number:
5365-00-923-2510
Federal Supply Class:
5365
National Item Identification Number:
009232510
Description:
SHIM
Detail:
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE; WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and BEARING, WASHER, THRUST.
|
Manufacturer Information:
| 414589-1 | 80020 | NAVAL AIR WARFARE CENTER AIRCRAFT DIVISION CODE 4.8.8.0.0.B BLDG 148-2 | | MIL-S-22499 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| BOLT HOLE CENTERLINE TO NEAREST EDGE DISTANCE | 2.500 INCHES NOMINAL | | BOLT HOLE QUANTITY | 2 | | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 16.234 INCHES MINIMUM AND 16.265 INCHES MAXIMUM | | CONSTRUCTION | LAMINATED | | FEATURES PROVIDED | SEPARABLE | | HOLE DIAMETER | 1.375 INCHES NOMINAL | | LAMINATION QUANTITY | 21 AND 1 | | LAMINATION THICKNESS | 0.003 INCHES NOMINAL AND 0.062 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-B-613,COMPOSITION 2,1/4 HARD FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | COPPER ALLOY 260 | | NONDEFINITIVE SPEC/STD DATA | 2 TYPE AND 2 CLASS AND 2 COMPOSITION | | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH | 1.625 INCHES NOMINAL | | OVERALL LENGTH | 19.437 INCHES MINIMUM AND 19.562 INCHES MAXIMUM | | OVERALL WIDTH | 5.000 INCHES NOMINAL | | SPECIFICATION/STANDARD DATA | 81349-MIL-S-22499 GOVERNMENT SPECIFICATION | | STYLE DESIGNATOR | NON-CIRCULAR W/SQUARE CORNERS |
|
|