|
|
|
National Stock Number:
5365-00-918-4651
Federal Supply Class:
5365
National Item Identification Number:
009184651
Description:
SPACER,PLATE
Detail:
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.
|
Manufacturer Information:
| 660342-0020 | 06481 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | 660342-20 | 06481 | NORTHROP GRUMMAN SYSTEMS CORPORATION |
|
Techincal Specification:
| APERTURE DIAMETER | 1.328 INCHES NOMINAL | | BOLT CIRCLE DIAMETER | 1.674 INCHES MINIMUM AND 1.682 INCHES MAXIMUM | | BOLT HOLE QUANTITY | 8 | | HOLE DIAMETER | 0.125 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5059 MIL SPEC ALL MATERIAL RESPONSES | | MATERIAL | STEEL COMP 301 OR STEEL COMP 302 OR STEEL COMP 304 OR STEEL COMP 316 | | OUTSIDE DIAMETER | 2.187 INCHES NOMINAL | | SPECIAL FEATURES | ONE HOLE 0.188 DIA. A AND 3 HOLES 0.125 DIA LOCATED ON SURFACE RIM SPACED 1.750 FROM CENTER TO CENTER |
|
|