|
|
|
National Stock Number:
5365-00-916-5244
Federal Supply Class:
5365
National Item Identification Number:
009165244
Description:
SHIM
Detail:
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE; WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and BEARING, WASHER, THRUST.
|
Manufacturer Information:
| 1850474-3 | 19315 | HONEYWELL INTL INC DEFENSE AVIONICS SYSTEMS FORMER BENDIX NAVIGATION AND CONTROL SYSTEMS | | 1850474-3 | 55973 | HONEYWELL INTL INC DEFENSE AVIONICS SYSTEMS FORMER GUIDANCE SYSTEMS DIV |
|
Techincal Specification:
| APERTURE DIAMETER | 0.422 INCHES NOMINAL | | BOLT CIRCLE DIAMETER | 0.100 INCHES NOMINAL | | BOLT HOLE QUANTITY | 2 | | CONSTRUCTION | ONE-PIECE | | FSC APPLICATION DATA | CONTROLS,GUIDED MISSILE SET | | HOLE DIAMETER | 0.1065 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5059,H MIL SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL COMP 301 | | OUTSIDE CORNER RADIUS | 0.5935 INCHES NOMINAL | | OVERALL THICKNESS | 0.0090 INCHES MINIMUM AND 0.0110 INCHES MAXIMUM | | OVERALL WIDTH | 1.177 INCHES MINIMUM AND 1.197 INCHES MAXIMUM | | SIDE RADIUS FROM GASKET CENTER | 0.375 INCHES NOMINAL | | STYLE DESIGNATOR | NON-CIRCULAR W/APERTURE | | SURFACE TREATMENT | PASSIVATE |
|
|