|
|
|
National Stock Number:
5365-00-890-2346
Federal Supply Class:
5365
National Item Identification Number:
008902346
Description:
SPACER,PLATE
Detail:
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.
|
Manufacturer Information:
| 1068792 | 22888 | FMC CORP | | 10861442 | 19207 | U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM | | 5365008902346 | A00AM | E.C.A ETABLISSEMENT CENTRAL DESAPPROVISIONNEMENTS DES FORCES ARMEE | | 5365008902346 | SCY13 | E.C.A ETABLISSEMENT CENTRALD'APPROVISIONNEMENT DES FORCES ARMEE | | 10861442 | T0720 | FNSS SAVUNMA SISTEMLERI ANONIM SIRKETI |
|
Techincal Specification:
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-698 FED SPEC 1ST MATERIAL RESPONSE OR QQ-S-700 FED SPEC 2ND MATERIAL RESPONSE | | MATERIAL | STEEL OR STEEL COMP 1025 | | OVERALL LENGTH | 6.875 INCHES NOMINAL | | OVERALL WIDTH | 2.250 INCHES NOMINAL | | SLOT WIDTH | 0.531 INCHES NOMINAL | | SLOT DEPTH | 0.438 INCHES NOMINAL | | SLOT QUANTITY | 2 | | SPECIAL FEATURES | SLOTS 5.000 IN. C TO C,LOCATED 0.938 IN. FROM END ON ONE SIDE | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE | | SURFACE TREATMENT | CADMIUM AND CHROMATE |
|
|