5365-00-690-7600, SHIM

National Stock Number:
5365-00-690-7600

Federal Supply Class:
5365

National Item Identification Number:
006907600

Description:
SHIM

Detail:
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE; WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and BEARING, WASHER, THRUST.

Manufacturer Information:

204-010-434-001	97499	BELL TEXTRON INC
204-010-434-1	97499	BELL TEXTRON INC
MILS22499	81349	MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M

Techincal Specification:

APERTURE DIAMETER	1.440 INCHES MINIMUM AND 1.460 INCHES MAXIMUM
BOLT HOLE QUANTITY	4
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH	1.320 INCHES MINIMUM AND 1.340 INCHES MAXIMUM
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH	1.320 INCHES MINIMUM AND 1.340 INCHES MAXIMUM
CONSTRUCTION	LAMINATED
FEATURES PROVIDED	SEPARABLE
HOLE DIAMETER	0.200 INCHES MINIMUM AND 0.206 INCHES MAXIMUM
LAMINATION QUANTITY	2
LAMINATION THICKNESS	0.002 INCHES NOMINAL
OUTSIDE CORNER BEVEL LENGTH ALONG LENGTH	0.160 INCHES MINIMUM AND 0.180 INCHES MAXIMUM
OUTSIDE CORNER BEVEL LENGTH ALONG WIDTH	0.160 INCHES MINIMUM AND 0.180 INCHES MAXIMUM
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH	0.260 INCHES MINIMUM AND 0.270 INCHES MAXIMUM
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH	0.260 INCHES MINIMUM AND 0.270 INCHES MAXIMUM
OVERALL LENGTH	1.850 INCHES MINIMUM AND 1.870 INCHES MAXIMUM
OVERALL WIDTH	1.850 INCHES MINIMUM AND 1.870 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATION	QQ-B-613 FED SPEC SINGLE MATERIAL RESPONSE
MATERIAL	COPPER ALLOY 260
NONDEFINITIVE SPEC/STD DATA	2 COMPOSITION AND 1 TYPE AND 1 CLASS

Click here to Register for Free 30-day Trial