5365-00-632-3093, SHIM

National Stock Number:
5365-00-632-3093

Federal Supply Class:
5365

National Item Identification Number:
006323093

Description:
SHIM

Detail:
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE; WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and BEARING, WASHER, THRUST.

Manufacturer Information:

9061531

18876

U S ARMY AVIATION AND MISSILE COMMAND

Techincal Specification:

APERTURE LENGTH	0.914 INCHES MINIMUM AND 0.918 INCHES MAXIMUM
APERTURE WIDTH	0.414 INCHES MINIMUM AND 0.418 INCHES MAXIMUM
BOLT HOLE QUANTITY	4
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH	1.214 INCHES MINIMUM AND 1.222 INCHES MAXIMUM
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH	1.276 INCHES MINIMUM AND 1.284 INCHES MAXIMUM
CONSTRUCTION	ONE-PIECE
HOLE DIAMETER	0.177 INCHES MINIMUM AND 0.180 INCHES MAXIMUM
OVERALL LENGTH	1.625 INCHES NOMINAL
OVERALL WIDTH	1.625 INCHES NOMINAL
MATERIAL DOCUMENT AND CLASSIFICATION	QQ-C-576 FED SPEC SINGLE MATERIAL RESPONSE
MATERIAL	COPPER ALLOY
OUTSIDE CORNER BEVEL LENGTH ALONG LENGTH	0.062 INCHES NOMINAL
OUTSIDE CORNER BEVEL LENGTH ALONG WIDTH	0.062 INCHES NOMINAL
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH	0.341 INCHES NOMINAL
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH	0.403 INCHES NOMINAL
OUTSIDE EDGE TO INSIDE EDGE SMALLEST DISTANCE ALONG LENGTH	1.207 INCHES NOMINAL
OUTSIDE EDGE TO INSIDE EDGE SMALLEST DISTANCE ALONG WIDTH	0.707 INCHES NOMINAL
STYLE DESIGNATOR	NON-CIRCULAR W/BOLT HOLES
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	MIL-C-5541,TYPE 1,CLASS 1 MIL SPEC SINGLE TREATMENT RESPONSE
SURFACE TREATMENT	CHROMATE

Click here to Register for Free 30-day Trial