5340-00-566-5360 SEAT,HELICAL COMPRESSION SPRING Index 6110-00-566-5364 END BELL,ELECTRICAL ROTATING EQU

National Stock Number:
5365-00-566-5361

Federal Supply Class:
5365

National Item Identification Number:
005665361

Description:
SPACER,PLATE

Detail:
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.


Manufacturer Information:
37040570210HONEYWELL INTERNATIONAL INC.
37040572599ALLIEDSIGNAL INC DBA ALLIED-SIGNAL AEROSPACE CO
37040599193HONEYWELL INTERNATIONAL INC.


Techincal Specification:
APERTURE DIAMETER1.400 INCHES MINIMUM AND 1.435 INCHES MAXIMUM
BOLT HOLE QUANTITY4
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH1.619 INCHES MINIMUM AND 1.629 INCHES MAXIMUM
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH1.619 INCHES MINIMUM AND 1.629 INCHES MAXIMUM
HOLE DIAMETER0.220 INCHES MINIMUM AND 0.260 INCHES MAXIMUM
OUTSIDE CORNER RADIUS0.300 INCHES MINIMUM AND 0.340 INCHES MAXIMUM
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH0.280 INCHES MINIMUM AND 0.305 INCHES MAXIMUM
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH0.280 INCHES MINIMUM AND 0.305 INCHES MAXIMUM
OVERALL LENGTH2.180 INCHES MINIMUM AND 2.240 INCHES MAXIMUM
OVERALL WIDTH2.180 INCHES MINIMUM AND 2.240 INCHES MAXIMUM
MATERIALSTEEL CORROSION RESISTING
SPECIAL FEATURESONE 0.065 IN. MAX DIA BY 0.170 IN. MAX DEEP DRILLED HOLE ON SURFACE
STYLE DESIGNATORNON-CIRCULAR W/BOLT HOLES
SURFACE TREATMENTPAINT


Click here to Register for Free 30-day Trial

© 2026 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us