|
|
|
National Stock Number:
5365-00-413-6170
Federal Supply Class:
5365
National Item Identification Number:
004136170
Description:
SPACER,PLATE
Detail:
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.
|
Manufacturer Information:
| 31D13 | 05643 | BARBER-GREENE CO | | 31D13 | 0MKW7 | MINNPAR, LLC | | 8719841 | 19207 | U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM | | 7048-014 | 31245 | TEREX USA, LLC | | 96111000178 | 61748 | CLYDE UNION INC DBA CLYDEUNION PUMPS | | 31D13 | 61790 | ASTEC INDUSTRIES INC | | SMTC1 | 05643 | BARBER-GREENE CO | | SMTC1 | 0MKW7 | MINNPAR, LLC | | Z996C | 10695 | TAYLOR-DUNN CORPORATION DBA METRO CROWN INTERNATIONAL | | F5414 | 21416 | HARSCO CORP FAIRMONT RAILWAY MOTORS DIV | | K21820 | 60038 | THE TIMKEN CORPORATION | | K21820 | 78534 | TIMKEN ORDNANCE CO |
|
Techincal Specification:
| APERTURE DIAMETER | 4.531 INCHES NOMINAL | | BOLT HOLE QUANTITY | 4 | | BOLT CIRCLE DIAMETER | 5.500 INCHES NOMINAL | | HOLE DIAMETER | 0.531 INCHES NOMINAL | | MATERIAL | ALUMINUM ALLOY | | OUTSIDE CORNER INVERTED RADIUS | 0.250 INCHES NOMINAL | | OUTSIDE CORNER RADIUS | 0.500 INCHES NOMINAL | | OVERALL WIDTH | 6.500 INCHES NOMINAL | | SIDE RADIUS FROM GASKET CENTER | 2.750 INCHES NOMINAL | | STYLE DESIGNATOR | NON-CIRCULAR W/APERTURE |
|
|