|
|
|
National Stock Number:
5365-00-409-9142
Federal Supply Class:
5365
National Item Identification Number:
004099142
Description:
SHIM
Detail:
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE; WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and BEARING, WASHER, THRUST.
|
Manufacturer Information:
| 529107-2 | 06987 | FL AEROSPACE CORP JANITROL AERO DIV/GENERAL DESIGN |
|
Techincal Specification:
| BOLT HOLE QUANTITY | 2 | | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 0.555 INCHES MINIMUM AND 0.565 INCHES MAXIMUM | | CONSTRUCTION | ONE-PIECE | | HOLE DIAMETER | 0.090 INCHES MINIMUM AND 0.100 INCHES MAXIMUM | | OVERALL LENGTH | 0.830 INCHES MINIMUM AND 0.850 INCHES MAXIMUM | | OVERALL WIDTH | 0.170 INCHES MINIMUM AND 0.180 INCHES MAXIMUM | | SPECIAL FEATURES | GROOVE LOCATED AT RIGHT ANGLE OF BOLT HOLES 0.275 IN. MIN,0.285 IN.MAX CENTER OF BOLT HOLES TO CENTER OF GROOVE,0.070 IN. MIN,0.080 IN. MAXRADIUS OF GROOVE |
|
|