|
|
|
National Stock Number:
5365-00-408-6041
Federal Supply Class:
5365
National Item Identification Number:
004086041
Description:
SHIM
Detail:
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE; WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and BEARING, WASHER, THRUST.
|
Manufacturer Information:
| 10674136 | 18876 | U S ARMY AVIATION AND MISSILE COMMAND |
|
Techincal Specification:
| BOLT HOLE QUANTITY | 6 | | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | 1.218 INCHES NOMINAL | | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 2.318 INCHES NOMINAL | | CONSTRUCTION | LAMINATED | | HOLE DIAMETER | 0.178 INCHES MINIMUM AND 0.198 INCHES MAXIMUM | | LAMINATION QUANTITY | 60 | | LAMINATION THICKNESS | 0.003 INCHES NOMINAL | | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH | 0.171 INCHES NOMINAL | | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH | 0.201 INCHES NOMINAL | | OVERALL LENGTH | 2.660 INCHES NOMINAL | | OVERALL WIDTH | 1.620 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-B-613,COMP 2 FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | COPPER ALLOY 260 | | SPECIAL FEATURES | TWO APERTURES 0.900 IN. LONG BY 0.400 IN. WIDE,EQUALLY SPACED IN CENTER OF SHIM |
|
|