|
|
|
National Stock Number:
5365-00-400-8798
Federal Supply Class:
5365
National Item Identification Number:
004008798
Description:
SPACER,PLATE
Detail:
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.
|
Manufacturer Information:
| 204509-1 | 70210 | HONEYWELL INTERNATIONAL INC. |
|
Techincal Specification:
| APERTURE DIAMETER | 5.080 INCHES MINIMUM AND 5.140 INCHES MAXIMUM | | BOLT CIRCLE DIAMETER | 5.750 INCHES NOMINAL | | BOLT HOLE QUANTITY | 9 | | LARGEST BOLT HOLE DIAMETER | 0.354 INCHES NOMINAL | | OUTSIDE DIAMETER | 6.260 INCHES MINIMUM AND 6.300 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/11,T6 FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | ALUMINUM ALLOY 6061 | | SMALLEST BOLT HOLE DIAMETER | 0.196 INCHES MINIMUM AND 0.205 INCHES MAXIMUM | | SPECIAL FEATURES | HAS SIX SLOTS ON ONE FACE,1.120 TO 1.140 IN. WIDE BY 0.050 IN. DEEP,EQUALLY SPACED; SPACED BETWEEN EACH SLOT IS A LARGE BOLT HOLE (6 TOTAL) AND CENTERED IN EVERY OTHER SLOT IS A SMALL BOLT HOLE (3 TOTAL) | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-A-8625,TYPE 1 MIL SPEC SINGLE TREATMENT RESPONSE | | SURFACE TREATMENT | ANODIZE |
|
|