|
|
|
National Stock Number:
5365-00-286-9298
Federal Supply Class:
5365
National Item Identification Number:
002869298
Description:
SPACER,RING
Detail:
A circular-shaped item designed to maintain predetermined distance between assembled parts and/or for distributing pressure or preventing endwise movement between member parts. It has a solid cross-section and two flat parallel bearing surfaces. The distance between the bearing surfaces perpendicular to the axis of the centrally located hole shall not exceed 25 percent of the outside diameter. The diameter of the centrally located hole must exceed 75 percent of the outside diameter. Excludes laminated items. For items manufactured from impregnated graphite or lubricated nonmetallic materials, excluding felt or plastics, see GASKET. For items manufactured from lubricated plastics, see BEARING, WASHER, THRUST. For items manufactured from lubricated felt, see FELT, MECHANICAL, PREFORMED. Excludes DISK, VALVE; INSULATOR WASHER; and SHIM. See also SPACER, PLATE and SPACER, SLEEVE.
|
Manufacturer Information:
| 171758 | 0AHP5 | CURTISS-WRIGHT CONTROLS, INC. |
|
Techincal Specification:
| OVERALL THICKNESS | 0.056 INCHES MINIMUM AND | | 0.064 INCHES MAXIMUM | | INSIDE DIAMETER | 1.589 INCHES MINIMUM AND | | 1.594 INCHES MAXIMUM | | OUTSIDE DIAMETER | 2.064 INCHES MINIMUM AND | | 2.074 INCHES MAXIMUM | | MATERIAL | STEEL | | SURFACE TREATMENT | CADMIUM | | HARDNESS RATING | 30.0 ROCKWELL C MINIMUM AND | | 35.0 ROCKWELL C MAXIMUM | | SURFACE FINISH | 50.0 MICROINCHES LEFT SIDE | | 50.0 MICROINCHES RIGHT SIDE | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 0AHP5 | | DESIGN CONTROL REFERENCE | 171758 |
|
|