|
|
|
National Stock Number:
5365-00-269-3424
Federal Supply Class:
5365
National Item Identification Number:
002693424
Description:
SPACER,PLATE
Detail:
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.
|
Manufacturer Information:
| 526110-3 | 70210 | HONEYWELL INTERNATIONAL INC. |
|
Techincal Specification:
| BOLT HOLE CENTERLINE TO NEAREST EDGE DISTANCE | 0.120 INCHES MINIMUM AND 0.130 INCHES MAXIMUM | | BOLT HOLE QUANTITY | 2 | | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 0.515 INCHES MINIMUM AND 0.520 INCHES MAXIMUM | | FSC APPLICATION DATA | ACTUATOR,MECHANICAL,TRIC TAB,ACFT | | HOLE DIAMETER | 0.126 INCHES MINIMUM AND 0.131 INCHES MAXIMUM | | MATERIAL | STEEL CORROSION RESISTING | | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH | 0.120 INCHES MINIMUM AND 0.130 INCHES MAXIMUM | | OVERALL LENGTH | 0.775 INCHES MINIMUM AND 0.785 INCHES MAXIMUM | | OVERALL WIDTH | 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM | | STYLE DESIGNATOR | NON-CIRCULAR W/SQUARE CORNERS | | SURFACE TREATMENT | PASSIVATE |
|
|