|
|
|
National Stock Number:
5365-00-262-3751
Federal Supply Class:
5365
National Item Identification Number:
002623751
Description:
SPACER,PLATE
Detail:
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.
|
Manufacturer Information:
| 11768-403-3 | 81868 | TELAIR US LLC |
|
Techincal Specification:
| APERTURE DIAMETER | 0.538 INCHES MINIMUM AND 0.546 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-6758 MIL SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL COMP 4130 | | OVERALL LENGTH | 0.970 INCHES MINIMUM AND 1.030 INCHES MAXIMUM | | OVERALL WIDTH | 0.720 INCHES MINIMUM AND 0.780 INCHES MAXIMUM | | SPECIAL FEATURES | ONE OF THE DEPTH SURFACES IS BOTH CURVED AND GROOVED,THE CURVE IS ALONG THE LONGITUDINAL DIMENSION WITH A RADIUS OF 3.500 IN.. THE GROOVE IS PERPENDICULAR TO THE LONGITUDINAL DIMENSION AND CENTERED ON THE APERTURE. THE GROOVE IS 0.100 IN. DEEP,0.620 IN. WIDE,AND 0.750 IN. LONG | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE 2,CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE | | SURFACE TREATMENT | CADMIUM |
|
|