5365-00-230-3384, SPACER,PLATE

3120-00-230-3383 ROLLER,LINEAR-ROTARY MOTION

National Stock Number:
5365-00-230-3384

Federal Supply Class:
5365

National Item Identification Number:
002303384

Description:
SPACER,PLATE

Detail:
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.

Manufacturer Information:

2483980-3	3H889	PARKER-HANNIFIN CORPORATION
2483980-3	59211	PARKER-HANNIFIN CORPORATION
2483980-3	92003	PARKER HANNIFIN CORPORATION DIV AEROSPACE GROUP HEADQUARTERS
2483980-3	99551	GOODRICH CORPORATION

Techincal Specification:

APERTURE DIAMETER	1.030 INCHES MINIMUM AND 1.050 INCHES MAXIMUM
BOLT HOLE QUANTITY	4
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH	3.625 INCHES NOMINAL
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH	1.312 INCHES NOMINAL
HOLE DIAMETER	0.210 INCHES MINIMUM AND 0.220 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATION	AMS 5517 ASSN STD SINGLE MATERIAL RESPONSE
MATERIAL	STEEL COMP 301
OUTSIDE CORNER RADIUS	0.180 INCHES MINIMUM AND 0.200 INCHES MAXIMUM
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH	0.180 INCHES MINIMUM AND 0.200 INCHES MAXIMUM
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH	0.215 INCHES MINIMUM AND 0.235 INCHES MAXIMUM
OVERALL LENGTH	3.990 INCHES MINIMUM AND 4.010 INCHES MAXIMUM
OVERALL WIDTH	1.910 INCHES MINIMUM AND 1.940 INCHES MAXIMUM
SPECIAL FEATURES	APERTURE 1.750 IN. FROM BOLT HOLES ON ONE W AND 1.060 IN. FROM BOLT HOLES ALONG ONE L
STYLE DESIGNATOR	NON-CIRCULAR W/BOLT HOLES

Click here to Register for Free 30-day Trial