|
|
|
National Stock Number:
5365-00-146-5376
Federal Supply Class:
5365
National Item Identification Number:
001465376
Description:
SHIM
Detail:
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE; WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and BEARING, WASHER, THRUST.
|
Manufacturer Information:
| 692805-2 | 99193 | HONEYWELL INTERNATIONAL INC. |
|
Techincal Specification:
| APERTURE DIAMETER | 1.870 INCHES MINIMUM AND 1.930 INCHES MAXIMUM | | BOLT HOLE QUANTITY | 9 | | BOLT CIRCLE DIAMETER | 2.400 INCHES NOMINAL | | CONSTRUCTION | LAMINATED | | HOLE DIAMETER | 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5059 MIL SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL COMP 302 | | OUTSIDE DIAMETER | 2.840 INCHES MINIMUM AND 2.900 INCHES MAXIMUM | | SPECIAL FEATURES | BOLT HOLES SPACED IN THREE EQUAL UNITS; 1.039 IN. DISTANCE BETWEEN BOLT HOLE UNITS; 0.600 IN. CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES |
|
|