5365-00-054-0982, SPACER,PLATE

National Stock Number:
5365-00-054-0982

Federal Supply Class:
5365

National Item Identification Number:
000540982

Description:
SPACER,PLATE

Detail:
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.

Manufacturer Information:

2-161-107-01

99193

HONEYWELL INTERNATIONAL INC.

Techincal Specification:

BOLT HOLE QUANTITY	2
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH	0.860 INCHES MINIMUM AND 0.880 INCHES MAXIMUM
HARDNESS RATING	76.0 ROCKWELL SUPERFICIAL 15-T NOMINAL
LARGEST BOLT HOLE DIAMETER	0.270 INCHES MINIMUM AND 0.290 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATION	AMS 5510 ASSN STD SINGLE MATERIAL RESPONSE
MATERIAL	STEEL COMP 321
OUTSIDE CORNER RADIUS	0.320 INCHES MINIMUM AND 0.440 INCHES MAXIMUM
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH	0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH	0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM
OVERALL LENGTH	1.340 INCHES MINIMUM AND 1.400 INCHES MAXIMUM
OVERALL WIDTH	0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM
SMALLEST BOLT HOLE DIAMETER	0.210 INCHES MINIMUM AND 0.230 INCHES MAXIMUM

Click here to Register for Free 30-day Trial