5365-00-008-6242, SPACER,PLATE

National Stock Number:
5365-00-008-6242

Federal Supply Class:
5365

National Item Identification Number:
000086242

Description:
SPACER,PLATE

Detail:
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.

Manufacturer Information:

4F19046-109B

98897

LOCKHEED MARTIN CORP

Techincal Specification:

BOLT HOLE CENTERLINE TO NEAREST EDGE DISTANCE	0.920 INCHES NOMINAL
BOLT HOLE QUANTITY	2
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH	2.400 INCHES MINIMUM AND 2.420 INCHES MAXIMUM
FSC APPLICATION DATA	NLG KNEELING DOOR,FOLDING BHD
HOLE DIAMETER	0.208 INCHES MINIMUM AND 0.214 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATION	QQ-A-250/12 FED SPEC SINGLE MATERIAL RESPONSE
MATERIAL	ALUMINUM ALLOY 7075
OUTSIDE CORNER BEVEL LENGTH ALONG LENGTH	0.170 INCHES MINIMUM AND 0.230 INCHES MAXIMUM
OUTSIDE CORNER BEVEL LENGTH ALONG WIDTH	0.170 INCHES MINIMUM AND 0.230 INCHES MAXIMUM
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH	0.890 INCHES MINIMUM AND 0.950 INCHES MAXIMUM
OVERALL LENGTH	3.140 INCHES MINIMUM AND 3.200 INCHES MAXIMUM
OVERALL WIDTH	1.270 INCHES MINIMUM AND 1.330 INCHES MAXIMUM
STYLE DESIGNATOR	NON-CIRCULAR W/BEVELED CORNERS
SPECIAL FEATURES	TWO CORNERS BEVELED ALONG SAME SIDE,OTHER CORNERS HAVE GREATER BEVEL,0.690 IN. LONG AND DEEP. ROUNDED CUT-OUT SECTION
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	ST-37-307,FSCM 98897 MFR REF SINGLE TREATMENT RESPONSE
SURFACE TREATMENT	PAINT

Click here to Register for Free 30-day Trial