| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.809 INCHES NOMINAL |
| FIRST LEG ANGLE | 87.0 DEGREES NOMINAL |
| FIRST LEG CORNER RADIUS | 0.50 INCHES NOMINAL |
| FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 1.480 INCHES NOMINAL |
| FIRST LEG LENGTH | 1.57 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.76 INCHES NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| FIRST LEG HOLE DIAMETER | 0.213 INCHES NOMINAL |
| FIRST LEG WIDTH | 3.0 INCHES NOMINAL |
| FIRST LEG STYLE | CORNER RADIUS |
| FIRST LEG THICKNESS | 0.125 INCHES NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | 17-4PH CRES PER AMS 5604 ASSN STD SINGLE MATERIAL RESPONSE |
| MATERIAL | STEEL CORROSION RESISTING |
| III PART NAME ASSIGNED BY CONTROLLING AGENCY | SUPPORT - UPPER ASSEMBLY |
| PROPRIETARY CHARACTERISTICS | PACS |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH | 1.802 INCHES NOMINAL |
| SECOND LEG DISTANCE BETWEEN UPPER HOLE CENTERS ALONG WIDTH | 1.4 INCHES NOMINAL |
| SECOND LEG CORNER RADIUS | 0.50 INCHES NOMINAL |
| SECOND LEG DISTANCE BETWEEN FIRST AND SECOND HOLE CENTERS ALONG WIDTH | 1.4 INCHES NOMINAL |
| SECOND LEG HOLE ARRANGEMENT STYLE | THREE HOLES |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.7 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.80 INCHES NOMINAL |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG STYLE | CORNER RADIUS |
| SECOND LEG THICKNESS | 0.125 INCHES NOMINAL |
| SECOND LEG LENGTH | 12.9 INCHES NOMINAL |
| SECOND LEG WIDTH | 3.0 INCHES NOMINAL |
| SPECIAL FEATURES | RECOMMENDED STOCK SIZE: 0.125 X 3.0 X 16.0 INCHES |
| STYLE DESIGNATOR | OFFSET ANGLE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | AMS 2700 TYPE 8 AFTER MACHINING ASSN STD SINGLE TREATMENT RESPONSE |
| SURFACE TREATMENT | PASSIVATE |