| FIRST LEG ANGLE | 0.12 RADIANS NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | THREE HOLES |
| FIRST LEG CORNER RADIUS | 0.25 INCHES NOMINAL |
| FIRST LEG STYLE | CORNER RADIUS |
| FIRST LEG THICKNESS | 0.08 INCHES NOMINAL |
| FIRST LEG WIDTH | 1.46 INCHES NOMINAL |
| FIRST LEG HOLE DIAMETER | 0.203 INCHES MINIMUM AND 0.210 INCHES MAXIMUM |
| FIRST LEG LENGTH | 0.83 INCHES NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 4050 AEROSPACE MATERIAL SPEC STD SINGLE MATERIAL RESPONSE |
| MATERIAL | ALUMINUM ALLOY 7050 |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | BRACKET ASSEMBLY-CLAMP SUPPORT,RIGHT ANGLE,PLATE NUT,FULL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.85 INCHES NOMINAL |
| SECOND LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| SECOND LEG CORNER RADIUS | 0.25 INCHES NOMINAL |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 0.820 INCHES NOMINAL |
| SECOND LEG RELATIONSHIP TO FIRST LEG | IDENTICAL |
| SECOND LEG STYLE | CORNER RADIUS |
| SECOND LEG THICKNESS | 0.08 INCHES NOMINAL |
| SECOND LEG HOLE DIAMETER | 0.166 INCHES MINIMUM AND 0.172 INCHES MAXIMUM |
| SECOND LEG LENGTH | 1.17 INCHES NOMINAL |
| SECOND LEG WIDTH | 1.46 INCHES NOMINAL |
| STYLE DESIGNATOR | ANGLE |
| SURFACE TREATMENT | PRIMER |