| CENTER SECTION HEIGHT | 0.600 INCHES NOMINAL |
| CENTER SECTION THICKNESS | 0.050 INCHES NOMINAL |
| CENTER SECTION WIDTH | 1.46 INCHES NOMINAL |
| FIRST LEG ANGLE | 0.12 RADIANS NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | THREE HOLES |
| FIRST LEG CORNER RADIUS | 0.25 INCHES NOMINAL |
| FIRST LEG STYLE | CORNER RADIUS |
| FIRST LEG THICKNESS | 0.050 INCHES NOMINAL |
| FIRST LEG WIDTH | 1.46 INCHES NOMINAL |
| FIRST LEG LENGTH | 0.830 INCHES NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 4050 AEROSPACE MATERIAL SPEC STD SINGLE MATERIAL RESPONSE |
| MATERIAL | STEEL |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | BRACKET ASSEMBLY-CLAMP SUPPORT ,ZEE,PLATE NUT FULL SIZE HOLES |
| SECOND LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| SECOND LEG ANGLE | 0.12 RADIANS NOMINAL |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH | 0.820 INCHES NOMINAL |
| SECOND LEG RELATIONSHIP TO FIRST LEG | IDENTICAL |
| SECOND LEG THICKNESS | 0.050 INCHES NOMINAL |
| SECOND LEG HOLE DIAMETER | 0.166 INCHES MINIMUM AND 0.172 INCHES MAXIMUM |
| SECOND LEG LENGTH | 0.725 INCHES NOMINAL |
| STYLE DESIGNATOR | DOUBLE ANGLE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-STL-5541,TYPE I,CLASS 3 MIL SPEC SINGLE TREATMENT RESPONSE |
| SURFACE TREATMENT | ANODIZE |