| CENTER SECTION HEIGHT | 0.890 INCHES MINIMUM AND 0.910 INCHES MAXIMUM |
| CENTER SECTION THICKNESS | 0.053 INCHES MINIMUM AND 0.073 INCHES MAXIMUM |
| CENTER SECTION WIDTH | 1.43 INCHES MINIMUM AND 1.49 INCHES MAXIMUM |
| FIRST LEG ANGLE | 0.12 RADIANS NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | THREE HOLES |
| FIRST LEG CORNER RADIUS | 0.25 INCHES NOMINAL |
| FIRST LEG STYLE | CORNER RADIUS |
| FIRST LEG THICKNESS | 0.053 INCHES MINIMUM AND 0.073 INCHES MAXIMUM |
| FIRST LEG WIDTH | 1.43 INCHES MINIMUM AND 1.49 INCHES MAXIMUM |
| FIRST LEG LENGTH | 0.75 INCHES MINIMUM AND 0.81 INCHES MAXIMUM |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS4050 AEROSPACE MATERIAL SPEC STD SINGLE MATERIAL RESPONSE |
| MATERIAL | ALUMINUM ALLOY 7050 |
| MOUNTING HOLE TYPE | PLAIN |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | BRACKET ASSEMBLY-CLAMP SUPPORT, ZEE, PLATE NUT, FULL SIZE HOLES. |
| SECOND LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| SECOND LEG ANGLE | 0.12 RADIANS NOMINAL |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 0.810 INCHES MINIMUM AND 0.830 INCHES MAXIMUM |
| SECOND LEG RELATIONSHIP TO FIRST LEG | IDENTICAL |
| SECOND LEG THICKNESS | 0.053 INCHES MINIMUM AND 0.073 INCHES MAXIMUM |
| SECOND LEG HOLE DIAMETER | 0.166 INCHES MINIMUM AND 0.172 INCHES MAXIMUM |
| SECOND LEG LENGTH | 0.715 INCHES MINIMUM AND 0.735 INCHES MAXIMUM |
| SPECIAL FEATURES | FIRST LEG HAS 2 HOLES 0.098 INCH DIAMETER AND ONE HOLE 0.203 INCH DIAMETER. |
| SPECIFICATION/STANDARD DATA | 76301-9-1080 MANUFACTURERS STANDARD |
| STYLE DESIGNATOR | DOUBLE ANGLE |
| SURFACE TREATMENT | PRIMER |