| FEATURES PROVIDED | NUT |
| FIRST LEG ANGLE | 45.0 DEGREES NOMINAL |
| FIRST LEG CORNER RADIUS | 0.250 INCHES NOMINAL |
| FIRST LEG STYLE | CORNER RADIUS |
| FIRST LEG THICKNESS | 0.063 INCHES NOMINAL |
| FIRST LEG WIDTH | 1.670 INCHES NOMINAL |
| FIRST LEG LENGTH | 1.000 INCHES NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 4050 AEROSPACE MATERIAL SPEC STD SINGLE MATERIAL RESPONSE |
| MATERIAL | ALUMINUM ALLOY 7050 |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | BRACKET ASSEMBLY-CLAMP SUPPORT, RIGHT ANGLE, CORNER PLATE NUT, FULL SIZE HOLES, FOR SMALL TWO HOLE CLAMPS |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.320 INCHES NOMINAL |
| SECOND LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| SECOND LEG CORNER RADIUS | 0.250 INCHES NOMINAL |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 0.820 INCHES NOMINAL |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG STYLE | CORNER RADIUS |
| SECOND LEG THICKNESS | 0.063 INCHES NOMINAL |
| SECOND LEG HOLE DIAMETER | 0.166 INCHES MINIMUM AND 0.172 INCHES MAXIMUM |
| SECOND LEG LENGTH | 0.900 INCHES NOMINAL |
| SECOND LEG WIDTH | 1.670 INCHES NOMINAL |
| SPECIAL FEATURES | COLOR NO. 17925 PER AMS-STD-595;1ST LEG HOLES 2-0.203 INCHES DIAMETER, 4-0.098 INCHES DIAMTER |
| STYLE DESIGNATOR | ANGLE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-PRF-23377 OR MIL-PRF-85582 OR MIL-PRF-85285 MIL SPEC SINGLE TREATMENT RESPONSE |
| SURFACE TREATMENT | PRIMER AND PAINT |