| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 2.00 INCHES NOMINAL |
| FIRST LEG CORNER RADIUS | 75.0 INCHES NOMINAL |
| FIRST LEG DISTANCE BETWEEN FIRST AND SECOND HOLE CENTERS ALONG LENGTH | 10.00 INCHES NOMINAL |
| FIRST LEG DISTANCE BETWEEN SECOND AND THIRD HOLE CENTERS ALONG LENGTH | 2.188 INCHES NOMINAL |
| FIRST LEG STYLE | CORNER RADIUS |
| FIRST LEG THICKNESS | 0.25 INCHES NOMINAL |
| FIRST LEG HOLE DIAMETER | 0.386 INCHES NOMINAL |
| FIRST LEG LENGTH | 2.00 INCHES NOMINAL |
| FIRST LEG WIDTH | 32.00 INCHES NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS-QQ-A-200/8 6061 TEMPER T6 INTERNATIONAL STD/SPEC SINGLE MATERIAL RESPONSE |
| MATERIAL THICKNESS | 0.25 INCHES NOMINAL |
| MATERIAL | ALUMINUM ALLOY 6061 |
| MOUNTING HOLE QUANTITY | 6 |
| MOUNTING HOLE TYPE | PLAIN AND COUNTERSUNK |
| OVERALL HEIGHT | 2.00 INCHES NOMINAL |
| OVERALL LENGTH | 32.00 INCHES NOMINAL |
| OVERALL WIDTH | 2.00 INCHES NOMINAL |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | BRACKET |
| SECOND LEG CORNER RADIUS | 75.0 INCHES NOMINAL |
| SECOND LEG STYLE | CORNER RADIUS |
| SECOND LEG THICKNESS | 0.25 INCHES NOMINAL |
| SECOND LEG LENGTH | 2.00 INCHES NOMINAL |
| SECOND LEG WIDTH | 32.00 INCHES NOMINAL |
| STYLE DESIGNATOR | ANGLE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-DTL-53022 TYPEIII MIL STD 1ST TREATMENT RESPONSE AND MIL-DLT-53039 MIL STD 2ND TREATMENT RESPONSE |
| SURFACE TREATMENT | PRIMER AND PAINT |
| SPECIAL FEATURES | THE THIRD AND FORTH HOLE ARE DRILLED TO A DIAMETER OF 0.257 INCH AND COUNTERSUNK AT 82 DEGREES DIAMETER 0.507 INCH |