| ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.500 INCHES NOMINAL |
| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG CORNER RADIUS | 0.250 INCHES NOMINAL |
| FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 3.50 INCHES NOMINAL |
| FIRST LEG LENGTH | 1.25 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.500 INCHES NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| FIRST LEG HOLE DIAMETER | 0.328 INCHES NOMINAL |
| FIRST LEG WIDTH | 4.50 INCHES NOMINAL |
| FIRST LEG STYLE | CORNER RADIUS |
| FIRST LEG THICKNESS | 0.120 INCHES NOMINAL |
| HOLE QUANTITY | 4 |
| MATERIAL DOCUMENT AND CLASSIFICATION | ASTMA240/A240M,CONDITION A AMERICAN SOCIETY FOR TESTING AND MATERIALS (ASTM) SINGLE MATERIAL RESPONSE |
| MATERIAL THICKNESS | 0.120 INCHES NOMINAL |
| MATERIAL | STEEL COMP 304L AND STEEL COMP 316 |
| III PART NAME ASSIGNED BY CONTROLLING AGENCY | BRACKET,ANGLE |
| PROPRIETARY CHARACTERISTICS | PACS |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH | 1.00 INCHES NOMINAL |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 2.50 INCHES NOMINAL |
| SECOND LEG ANGLE | 90.0 DEGREES NOMINAL |
| SECOND LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| SECOND LEG STYLE | CORNER RADIUS |
| SECOND LEG THICKNESS | 0.120 INCHES NOMINAL |
| SECOND LEG LENGTH | 3.63 INCHES NOMINAL |
| SECOND LEG WIDTH | 4.50 INCHES NOMINAL |
| SLOT LENGTH | 4.50 INCHES NOMINAL |
| SPECIAL FEATURES | 2ND LEG HAS TWO DIFFERENT SIZE HOLES 1.010 IN AND 1.510 IN;BOTH ARE FLAT ON ONE SIDE |
| STYLE DESIGNATOR | ANGLE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-STD-171 (5.4.1) MIL STD 1ST TREATMENT RESPONSE AND MIL-DTL-53022 MIL STD 2ND TREATMENT RESPONSE OR MIL-DTL-53030 MIL STD 2ND TREATMENT RESPONSE AND MIL-PRF-22750 MIL STD 3RD TREATMENT RESPONSE OR MIL-DTL-53072 (APPROVED EQUIVELENT) MIL STD 3RD TREATMENT RESPONSE |
| SURFACE TREATMENT | PASSIVATE AND CARC (CHEMICAL AGENT RESISTANT COATING) AND PRIMER AND PAINT |