| ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG CORNER RADIUS | 0.38 INCHES NOMINAL |
| FIRST LEG WIDTH | 1.125 INCHES NOMINAL |
| FIRST LEG LENGTH | 4.00 INCHES NOMINAL |
| FIRST LEG STYLE | CORNER RADIUS |
| FIRST LEG THICKNESS | 0.120 INCHES NOMINAL |
| HOLE QUANTITY | 4 |
| MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A240/A240M CONDITION A AMERICAN SOCIETY FOR TESTING AND MATERIALS (ASTM) SINGLE MATERIAL RESPONSE |
| MATERIAL THICKNESS | 0.120 INCHES NOMINAL |
| MATERIAL | STEEL COMP 304L OR STEEL COMP 316 |
| III PART NAME ASSIGNED BY CONTROLLING AGENCY | BRACKET,ANGLE |
| PROPRIETARY CHARACTERISTICS | PACS |
| OVERALL LENGTH | 4.00 INCHES NOMINAL |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 1.760 INCHES NOMINAL |
| SECOND LEG ANGLE | 90.0 DEGREES NOMINAL |
| SECOND LEG CORNER RADIUS | 0.75 INCHES NOMINAL |
| SECOND LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| SECOND LEG HOLE DIAMETER | 0.825 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.800 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 1.120 INCHES NOMINAL |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG STYLE | CORNER RADIUS |
| SECOND LEG THICKNESS | 0.120 INCHES NOMINAL |
| SECOND LEG LENGTH | 4.00 INCHES NOMINAL |
| SECOND LEG WIDTH | 2.00 INCHES NOMINAL |
| SPECIAL FEATURES | HOLES IN 2ND LEG HAVE A FLAT SIDE |
| STYLE DESIGNATOR | ANGLE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-STD-171 (5.4.1) MIL SPEC SINGLE TREATMENT RESPONSE |
| SURFACE TREATMENT | PASSIVATE |